Maxsine EP3 AC Series, Руководство пользователя

Страница: 182 / 246

Chapter 5 Parameters
172
P412 Path 7 control word low 16 bits
Range
Default
value
Unit
Usag
e
-32768 ～ 32767 0 M
 Path 7 control word low 16 bits, refers to parameter P400 for explanation.
P413 Path 7 control word high 16 bits
Range
Default
value
Unit
Usag
e
-32768 ～ 32767 0 M
 Path 7 control word high 16 bits, refers to parameter P401 for explanation.
P414 Path 8 control word low 16 bits
Range
Default
value
Unit
Usag
e
-32768
～
32767 0 M
 Path 8 control word low 16 bits, refers to parameter P400 for explanation.
P415 Path 8 control word high 16 bits
Range
Default
value
Unit
Usag
e
-32768
～
32767 0 M
 Path 8 control word high 16 bits, refers to parameter P401 for explanation.
5.4.6 Parameters of section 5
P500 Path 1 data low 16 bits
Range
Default
value
Unit
Usag
e
-32768
～
32767 0 PUU M
 This parameter is used in motion mode. When path TYPE is one and position command is
chose, this parameter means the low 16 bits of target position
 Cooperate with the high 16 bits of path data to form the target position of 32 digit. The unit
is PUU, which is equal to the resolution of encoder.
 The target position is confirmed related to the position after origin regression. Regard the
position after origin regression as origin
P501 Path 1 data high 16 bits
Range
Default
value
Unit
Usag
e
-32768
～
32767 0 PUU M
 This parameter is used in motion mode. When the path TYRE is 1 and position command is
chose, this parameter means the high 16 bits of target position.
 Cooperate with the low 16 bits of path data to form the target position of 32 bits. The unit is
PUU, which is equal to the resolution of encoder.