manualshive.com logo in svg

Manitowoc CD25, Руководство оператора, Страница: 16 / 160

Поделиться
Скачать
Manitowoc CD25 Скачать руководство пользователя страница 16

INTRODUCTION

CD25

1-2

Published 1-06-2017 Control # 579-01

Delivery Report

A Delivery Report must be filled out by the Manitowoc
Cranes distributor, signed by the purchaser, and returned to
the Manitowoc Company once the crane is sold, leased or
rented. This report activates the warranty period, assuring
that your claims during the warranty period will be honored
and processed expediently. To guarantee full warranty
service, make sure your Manitowoc Cranes distributor has
returned the report to the Manitowoc Company. An engine
warranty form must also be filled out, signed and returned to
the engine manufacturer for full warranty coverage.

Customer Support

Manitowoc Cranes and our Distributor Network want to
ensure your satisfaction with our products and customer
support. Your local distributor is the best equipped and most
knowledgeable to assist you for parts, service and warranty
issues. They have the facilities, parts, factory trained
personnel, and the information to assist you in a timely
manner. We request that you first contact them for
assistance. If you feel you need factory assistance, please
ask your local Manitowoc Cranes distributor to coordinate
the contact on your behalf.

New Owners

If you are the new owner of a Manitowoc crane, please
register it with Manitowoc Crane Care so we have the ability
to contact you if the need arises.

Go to: 

http://www.manitowoccranes.com/MCG_CARE/

Includes/EN/changeofownership.cfm

 and complete the form.

SAFETY INFORMATION

A Safety CD which includes sections on operation, safety
and maintenance for crane operators and owners is supplied
when the crane is purchased new. Additional copies are
available from your local distributor.

GENERAL CRANE DESIGN

This crane has been designed for maximum performance
with minimum maintenance. With proper care, years of
trouble-free service can be expected. 

Constant improvement and engineering progress makes it
necessary that we reserve the right to make specification
and equipment changes without notice.

SPECIFICATIONS

ENGINE

Diesel Engine

Make and Model ........................................................................................ Cummins QSB4.5L diesel
Type of Aspiration ...................................................................................... Turbocharged
Horsepower ............................................................................................... 130 hp @ 2500 rpm
Low Engine Idle Speed .............................................................................. 800 rpm
Intermediate Speed Control (ISC) Idle Speed ............................................ 1200 rpm - Coolant Temperature is less than

71° C (160° F)

Maximum Engine Speed ............................................................................ 2500 rpm 

BOOM

Construction............................................................................................... Telescopic, welded box sections
Number of Sections ................................................................................... Four
Reach ........................................................................................................ 23 ft. 8 in. to 71 ft. (7.21 m to 21.6 m)

MAST ROTATION - 360°

Mast Bearing (Diameter)............................................................................ 40.00 inches (1016 mm)
Swing Drive Mechanism ............................................................................ Hydraulic motor driven gearbox
Swing Speed .............................................................................................. 2.5 rpm

ELECTRICAL

Type ........................................................................................................... 12 VDC
Alternator ................................................................................................... 130 amps
Batteries..................................................................................................... 150 amp/hr each

FUEL TANK

Capacity ..................................................................................................... 50 gal. (189 L)

HYDRAULIC SYSTEM

Reference Only

Содержание CD25

































































































































































Отзывы:

Нет отзывов