Magnum Dimensions MMSA Series Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 58

Magnum Dimensions MMSA Series Скачать руководство пользователя страница 52

© 2015 Sensata Technologies

Appendix A – Optional Equipment and Accessories

46

Appendix A – Optional Equipment & Accessories

The following components are available for use with the MMSA1012
inverter/charger. Some of these items are required depending upon
the intended use of the inverter.

Smart Battery Combiner

The Smart Battery Combiner (ME-SBC

TM

) is designed to monitor

and charge a second battery using a portion of the current that
is charging the main battery. The ME-SBC eliminates a signi

fi

cant

voltage drop, and provides automatic turn-on and turn-off based on
adjustable voltage set-points. This allows different batteries to be
charged from a single charging source, and prevents overcharging/
undercharging.

Auto Generator Start Controller

The ME-AGS-N Automatic Generator Start controller (Network
version) is designed to automatically start your generator based
on low battery condition or high temperature. It works

with 12, 24,

and 48-volt battery banks and includes a 4-position DIP (Dual In-
line Package) switch which provides the ability to change the relay
timing con

fi

gurations to allow compatibility with most generators.

Battery Monitor Kit

The ME-BMK Battery Monitor Kit is a single battery bank amp-
hour meter

that monitors the condition of the battery and provides

information to let you know how much energy you have available
and to plan your electrical usage to ensure the battery is not being
over-discharged. The ME-BMK-NS version does not include

a DC

shunt—order the ME-BMK to receive a 500A/50mv DC shunt.

Fuse Block/Fuses

The fuse/fuse-blocks are used to protect the battery bank, inverter,
and cables from damage caused by DC short circuits and overloads.
They include a slow-blow fuse with mounting block and protective
cover. The 125 and 200-amp models use an ANL type fuse and the
300 and 400-amp models use a Class-T fuse.

«
...
50
51
52
53
54
...
»

Содержание MMSA Series



























































Отзывы:

Нет отзывов