Magnum Dimensions MMSA Series Скачать руководство пользователя страница 2

Страница: 2 / 58

Thank you from all of us at Sensata Technologies for purchasing

this MMSA1012 inverter/charger. The MMSA1012 is a product under

the Magnum-Dimensions brand from Sensata Technologies.

understand there are many purchasing options in the marketplace,

and are pleased that you have decided on a Magnum product. This

product was proudly assembled and tested in the United States in

our Everett, Washington, facility.
We are committed to providing quality products and services. We

hope your experience with us is pleasant and professional.

Disclaimer of Liability

The use of this manual and the conditions or methods of installation,

operation, use, and maintenance of the MMSA1012 inverter/charger

are beyond the control of Sensata Technologies. Therefore, this

company does not assume responsibility and expressly disclaims

liability for loss, damage, or expense whether direct, indirect,

consequential or incidental that may arise out of or be in any way

connected with such installation, operation, use, or maintenance.
Due to continuous improvements and product updates, the images

shown in this manual may not exactly match the unit purchased.

Restrictions on Use

The MMSA1012 inverter/charger may only be used in life support

devices and systems with the express written approval of Sensata

Technologies. Failure of this inverter can reasonably be expected to

cause failure of that life support device or system, or to affect the

safety or effectiveness of that device or system. If the MMSA1012

inverter fails, it is reasonable to assume the health of the user or

other persons may be endangered.

Copyright Notice

Permission to copy, distribute, and/or modify this document is

prohibited without written permission from Sensata.

Document Information

Description – MMSA1012 Owner’s Manual
Part Number and Revision – 64-0073 Rev A
Date Published – July 2015
This entire manual is available for download—with many of the

diagrams available in color—under the Library menu on our website.

Contact Information

Sensata Technologies
2211 West Casino Rd.
Everett, WA 98204
Phone: (425) 353-8833 / Fax: (425) 353-8390
Web: www.Magnum-Dimensions.com

Содержание MMSA Series



























































Результаты поиска

Содержание MMSA Series

Отзывы:

Magnum Dimensions MMSA Series, Руководство пользователя, Страница: 2 / 58

Результаты поиска

Содержание MMSA Series

Отзывы: