Motorized Cable Reel Technical Manual
September 2021
6 Electrical installation
Electricians must follow all electrical installation instructions and safety procedures listed in this chapter.
The device arrives at your destination pre-wired by the manufacturer or requires you to wire it after
delivery. Follow the appropriate installation steps required for your device's wiring configuration.
Device delivery variants:
1) Wiring by factory
2) Wiring by customer
X
Performed by the customer
O Pre-wired by the manufacturer
–
Not present
DANGER
Electric current
Electric shock
►
Observe the five safety rules.(
|
►
Check the electrical isolation of the device.
►
Check the protective conductor system for electrical continuity.
►
Do not use the PE protective conductor system as a PEN system.
►
Observe EN, VDE and locally applicable safety regulations.
NOTICE
Incorrect tightening torques
Damage to the screws and device
►
Observe the tightening torques of the screws (
|
NOTICE
Underestimating the minimum bending
radius
Damage to the reeling cable
►
Observe and comply with the minimum bending radius of the reeling cable.
Tasks
Slip Rings
Brush Holders
Terminal Slip
Wiring
X
X
–
Wiring
O
X
O
Wiring
O
X
–