![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888029.webp)
Motorized Cable Reel Technical Manual
September 2021
Figure 17 Reel body installation on the reel flange
1 Gearbox
2 Reel flange
3 Lock washer
4 Locknut
5 Reel body
6 Hexagon screw with Nord-Lock
®
wedge-locking washers
7 Hexagon nut with Nord-Lock
®
wedge-locking washers
8 Sealing flange
9 Internal hexagon screw
3
The reel body has been attached to suitable lifting equipment using a round loop.
1. Slide the reel flange onto the hollow shaft of the gearbox.
2. Slide the lock washer onto the hollow shaft.
3. Install the locknut.
4. Slide the reel body onto the reel flange.
5. Align the reel body.
6. Insert the hexagon screws with Nord-Lock
®
wedge-locking washers through the holes on the reel body
and reel flange.
7. Fasten the hexagon screws with Nord-Lock
®
wedge-locking washers and hexagon nuts cross-wise
(
|
8. Install the sealing flange with internal hexagon screws onto the reel flange.
9. Remove the round loop.
INFORMATION
►
See Figure 17 for action instructions 1 to 9.