![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888045.webp)
Motorized Cable Reel Technical Manual
September 2021
6.2.6 Connecting the reeling cable to the terminal strip
Figure 30 Routing the reeling cable for connection to the terminal strip
1 Strain relief clamp unwinding direction to the left
2 Strain relief clamp unwinding direction to the right
3
The cover has been disassembled.
3
The slip rings have been connected to the terminal strip.
1. Loosen the screws of the strain relief clamp (
|
2. Loosen the cable screw connection on the terminal strip cable enclosure.
3. Route the reeling cable along the reel rim onto the reel body.
4. Route the reeling cable through the strain relief clamp.
5. Route the reeling cable through the cable screw connection into the terminal strip cable enclosure.
6. Strip the reeling cable according to the required connection length.
7. Strip the wires and fit them with ferrules.
8. Connect the wires to the terminal strip according to the assembly.
9. Check the continuity of the PE connection.
10. Check the continuity of the phases and other connections.
11. Tighten the cable screw connection on the terminal strip cable enclosure.
12. Install the cover.