![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888027.webp)
Motorized Cable Reel Technical Manual
September 2021
Figure 14 Assembly of reel body detail A, B and C part 2
1 Circular blank
2 Lug with hexagon screws and hexagon nuts
3 Reel rim
4 Outer rim
5 Aligned reel body halves
3
Reel body halves are on a level surface.
3
One reel body half is pre-assembled with lugs, hexagon screws and washers
(
|
Figure 13, page 26, detail A).
3
The abutting surface of the circular blank has been lubricated.
3
The hexagon screws, washers and hexagon nuts provided are ready.
1. Join and align the reel body halves. Ensure that the reel body halves are aligned
(
|
Figure 14, detail C).
2. Screw the reel body halves in place on the circular blank with M20 x 25 mm hexagon screws with
washers.
3. Screw the reel rim in place with hexagon screws M12 x 25 mm, washers and hexagon nuts
(
|
detail B).
4. Screw the outer rim in place with hexagon screws M12 x 25 mm, washers and hexagon nuts
(
|
detail C).
INFORMATION
Align the reel body halves and ensure their alignment.