![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888079.webp)
Motorized Cable Reel Technical Manual
September 2021
15 Disassembly
When disassembling the device, all operators and maintenance personnel must follow all the instructions
and safety procedures listed in this chapter.
15.1 Disassembling the complete device
3
A voltage-free state has been established.
1. Disconnect the existing cables from the supply unit.
2. Remove the permanently routed cable from the device.
3. Remove the reeling cable from the device.
4. Attach the device to the lifting equipment using round loops (
|
5. Tighten the round loops and maintain tension.
6. Ensure that the weight of the device is evenly distributed.
7. Disassemble the device in its installation location.
8. Lift the device onto a pallet for transport using a lifting cart and secure the device.
15.2 Disassembling the device into individual components
3
A voltage-free state has been established.
1. Disconnect the existing cables from the supply unit.
2. Remove the permanently routed cable from the device.
3. Remove the reeling cable from the device.
4. Attach the reel body to the lifting equipment using round loops (
|
5. Tighten the round loops and maintain tension.
6. Ensure that the weight of the reel body is evenly distributed.
7. Disassemble the reel body at the installation location (
|
8. Use a lifting cart or a forklift to transport the reel body onto a pallet and secure it.
9. Attach the drive with cable enclosure and reel flange (
|
Figure 12, page 25) to the lifting equipment
using round loops.
10. Tighten the round loops and maintain tension.
11. Ensure even weight distribution of the drive with cable enclosure and reel flange.
12. Disassemble the drive with cable enclosure and reel flange at the installation location.
13. Use a lifting cart or a forklift to transport the drive with cable enclosure and reel flange onto a pallet and
secure it.