![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888056.webp)
Motorized Cable Reel Technical Manual
September 2021
6.4 Connecting the permanently routed cable to the brush
holders
3
The covering hood has been disassembled.
1. Loosen the cable screw connection on the cable enclosure.
2. Guide the permanently routed cable through the cable screw connection into the cable enclosure.
3. Strip the permanently routed cable according to the required connection length.
4. Strip the wires and fit them with ring cable lugs.
5. Use a brass screw to connect the wire PE to the brush holder PE (
|
6.1, page 34, and 6.2, page 36).
6. Connect the wire phases to the brush holder phase.
7. Check the continuity of the PE connection.
8. Check the continuity of the phases and other connections.
9. Tighten the cable screw connection on the cable enclosure.
10. Install the covering hood.