![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888069.webp)
Motorized Cable Reel Technical Manual
September 2021
Gearbox gets too
hot
The fan hood of the motor and/or gearbox are
heavily soiled
►
Clean the motor fan hood
►
Clean the gearbox surface
Wrong oil has been used (e.g., wrong viscosity)
►
Check the quality of the
gear oil (
|
Gear oil is too old
►
Replace the gear oil
(
|
000001_WA)
Increased bearing play and/or damaged
bearings
►
Contact customer service
Power flow interrupted due to breakage in
gearbox
►
Contact customer service
Increased play
on drive/output
unit
Elastic elements are worn (e.g., in the case of
couplings)
►
Contact customer service
Positive connection disconnected by overload
►
Contact customer service
Unusual noise
from motor
Increased bearing play and/or damaged
bearings
►
Contact customer service
Wrong converter parameter settings
►
Correct the parameter
settings
Output shaft does
not rotate with
running motor
Excessively high load on drive/output unit
►
Contact customer service
Motor brake not ventilated
►
Contact customer service
Drive does not
start/starts with
difficulty
The drive turns against the return stop
►
Contact customer service
When the motor
is stopped, the
reeling cable
pulls off
automatically
Return stop is faulty
Motor brake is faulty
►
Contact customer service
Fault
Possible Causes
Actions