Motorized Cable Reel Technical Manual
September 2021
5.1 Installing the device in its installation location
3
Install the device after unpacking and inspecting it..
3
Ensure that the installation location is level and clean.
1. Attach the device to the lifting equipment by means of round loops (
|
2. Tighten the round loops and maintain their tension.
3. Ensure that the weight of the device is evenly distributed.
4. Lift the device with lifting equipment.
5. Position the device in its installation location.
6. Align the device.
7. Attach the device to its installation location.
8. Check the tightening torques of the screw connections (
5.2 Installing the drive unit and reel body in the installation
location
5.2.1 Installing the drive unit
Figure 12 Drive unit with round loops
►
Transport the drive unit to its installation location suspended from the lifting equipment as follows:
1. Attach the device to the lifting equipment using round loops (
|
2. Tighten the round loops and maintain tension.
3. Ensure even weight distribution of the drive unit.
4. Lift the device with lifting equipment.
5. Position the device in its installation location.