![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888024.webp)
Motorized Cable Reel Technical Manual
September 2021
5 Installation
Installers must carefully follow all procedures in this chapter to help ensure proper installation of the
device.
Figure 11 Tightening the screws and/or nuts
The location where the device will be installed must meet specific requirements. An improper or unstable
installation location will result in radial and axial offset during operation. This potential problem cannot be
measured when the device is at a standstill.
►
Choose an installation location that:
•
remains free from resonance-induced vibrations.
•
does not transfer vibrations.
•
resists warpage.
•
adequately handles the weight of the device.
•
withstands the forces acting on the gearbox.
•
shows no height offset in a two-part installation location.
►
Prevent displacement by external forces resulting from side impacts.
NOTICE
Stress cracks in the gearbox
Imbalance and oil leaking from the gearbox
►
Do not distort the gear plate when tightening the screws.
►
Any deviation in the levelness of the gearbox support may not exceed 0.1 - 0.2 mm.
►
Tighten the screws diagonally.
►
Observe the tightening torques of the screws.