![background image](http://html.mh-extra.com/html/magnetek/g-series/g-series_technical-manual_693888031.webp)
Motorized Cable Reel Technical Manual
September 2021
Figure 19 Terminal strip cable enclosure installation
1 Terminal strip cable enclosure
2 Hexagon nut with Nord-Lock wedge-locking washers
3 Reel body
4 Sealant
3
The reel body has been attached to suitable lifting equipment using a round loop.
3
The slip rings connection cable has been guided to the terminal strip through the hollow shaft.
1. Lubricate the terminal strip cable enclosure and reel body (
|
2. Slide the reel flange onto the hollow shaft of the gearbox.
3. Slide the lock washer onto the hollow shaft.
4. Install the locknut.
5. Slide the reel body onto the reel flange.
6. Align the reel body.
7. Slide the terminal strip cable enclosure onto the hollow shaft.
8. Align the terminal strip cable enclosure.
9. Insert the hexagon screws with Nord-Lock
®
wedge-locking washers through the holes on the terminal
strip cable enclosure, reel body and reel flange.
10. Fasten the hexagon screws with Nord-Lock
®
wedge-locking washers and hexagon nuts cross-wise
(
|
11. Install the sealing flange with internal hexagon screws onto reel flange.
12. Remove the round loop.
13. Install the spacer bolt in the terminal strip cable enclosure.
14. Install the mounting rail with terminal strip onto the spacer bolt.
15. Connect the single wires according to their numbering.
16. Install the cover.
17. Install the clamping ring.