LS Industrial Systems G0L-GWRA Скачать руководство пользователя страница 2

Страница: 2 / 116

Safety Instructions

Before using the product ….

For your safety and effective operation, please read the safety instructions thoroughly before using the

product.

▶

Safety Instructions should always be observed in order to prevent accident or risk with the safe and

proper use the product.

▶

Instructions are separated into “Warning” and “Caution”, and the meaning of the terms is as follows

▶

The marks displayed on the product and in the user’s manual have the following meanings

indicates handling and directions probably causing a danger.

If you find this mark, you should read it carefully and follow the directions to avoid danger.

indicates the possibility of electric shock under a certain condition.

▶

The user’s manual even after read should be kept available and accessible to any user of the product

Caution

This symbol indicates the possibility of slight injury or
damage to products if some applicable instruction is
violated.

Warning

This symbol indicates the possibility of serious injury
or death if some applicable instruction is violated.

Содержание G0L-GWRA





















































































































Результаты поиска

Содержание G0L-GWRA

Отзывы:

Бренды по названию

Популярные бренды

LS Industrial Systems G0L-GWRA, Руководство пользователя

Результаты поиска

Содержание G0L-GWRA

Отзывы:

Бренды по названию

Популярные бренды