LS Industrial Systems G0L-GWRA, Руководство пользователя

Страница: 108 / 116

Appendix
A-7
A2.2 High-speed link detail flag
[Table A2.4] High-speed link detail flag
x: K1000S=9, K300S/K200S=4 m: high-speed link no.
Key word Type
Bit
position
Contents Description
_HSmRLINK Bit Dx600.0 RUN_LINK information
Indicates that all stations is normal and work according to
parameter set in the high-speed link. It is on under following
condition.
1. All station set in the parameter are RUN mode, there is no
error.
2. All data block set in the parameter is normal.
3. The parameter set in the each station set in the parameter is
normal
Once RUN_LINK is turned on, it keeps its value as long as it
stops by Link Disable.
_HSmLTRBL Bit Dx600.1
HS link’s abnormal
information
(LINK_TROUBLE)
This flag is turned on when _HSmRLINK is on and
communication status is as follows.
1. Station set in the parameter is not RUN mode.
2. Station set in the parameter has error.
3. Communication status of data block set in the parameter is not
normal
LINK-TROUBLE is on with above conditions.
If above condition disappear, it is turned off again.
_HSmSTATE[
k]
(k=0~63)
Bit
Array
Dx601.0 ~
Dx604.15
Total communication
status information of k
data block set I the HS
link parameter
Indicates the total status of communication information about
data block set in the parameter
_HSmSTATE[k] = _HSmMOD[k] & _HSmTRX[k] & _HSmERR[k]
_HSmMOD[k]
(k=0~63)
Bit
Array
Dx605.0 ~
Dx608.15
Mode information
(RUN = 1, others = 0)
Indicate the operating mode of station set in the k data block of
parameter
_HSmTRX[k]
(k=0~63)
Bit
Array
Dx609.0 ~
Dx612.15
Status information
(normal=1, abnormal=0)
Indicate whether communication status of k data block of
parameter is normal or not.
_HSmERR[k]
(k=0~63)
Bit
Array
Dx613.0 ~
Dx616.15
Status information of
station set in the k data
block at the HS link
parameter
(normal=1, abnormal=0)
Indicates whether there is error or not at the station set in the k
data block of parameter.