EM58 • HS58 • HM58 POWERLINK
Figure 2 - Connectors and diagnostic LEDs
4.2 PWR Power supply connector (Figure 2)
M12 4-pin male connector with A coding is used for power supply.
Description
Pin
+10Vdc +30Vdc
1
n.c.
2
0Vdc
3
n.c.
4
n.c. = not connected
4.3 P1 Port 1 and P2 Port 2 connectors (Figure 2)
Two M12 4-pin female connectors with D coding are used for Ethernet
connection through port 1 and port 2.
Description
Pin
Tx Data +
1
Rx Data +
2
Tx Data -
3
Rx Data -
4
The Ethernet interface supports 100 Mbit/s, half duplex operation.
P1 PORT 1 and P2 PORT 2 M12 connectors have pin-out in compliance with the
POWERLINK standard. Therefore you can use standard POWERLINK cables
commercially available.
P1 PORT 1 and P2 PORT 2 connectors are interchangeable.
MAN EM58_HS58_HM58 PL E 1.1.odt
Electrical connections
30 of 108
