EM58 • HS58 • HM58 POWERLINK
5.4.3 Setting the device node address in the project
You are required to enter in the project the node address that has been set
physically in the installed CN device. For information on the POWERLINK Node
ID setting refer to the “4.8 POWERLINK Node ID: DIP A” section on page 32.
Enter the
Physical View
window by pressing the
Physical View
tab.
Figure 10 - Physical View window
Scroll through the tree of the installed devices, extend the PLK (Powerlink)
group and select the module (for instance:
Lika_Electronic_HM16...
). Right-
click the
Lika_Electronic_HM16...
module in the list and then press the
Change Node Number
command.
Figure 11 - Setting the node address
MAN EM58_HS58_HM58 PL E 1.1.odt
Quick reference
43 of 108
