Lika POWERLINK EM58 PL Скачать руководство пользователя | Manualshive

Страница: 78 / 108

background image

EM58 • HS58 • HM58 POWERLINK

1030-08 NMT_InterfaceGroup_0h_REC.InterfaceAdminState_U8

[Unsigned8, rw]
It shows the current administration state of the interface.
It can be:

0 = Down
1 = Up

Default = 1 (min. = 0, max. = 1)

1030-09 NMT_InterfaceGroup_0h_REC.Valid_BOOL

[Boolean, rw]
It specifies whether the data of this object is valid. If the value is TRUE (1) the
data of this object is valid. If the value is FALSE (0) the data of this object is
invalid.
Default = TRUE (1) (min. = FALSE (0), max. = TRUE (1))

1300 SDO_SequLayerTimeout_U32

[Unsigned32, rw]
The object provides a timeout value in milliseconds (ms) for the connection
abort recognition of the SDO sequence layer.
The connection is detected as broken if the opposite node is shut down or
disconnected from the network. The connection is considered broken when no
acknowledgement is received within the timeout set in this object.
Default = 15000 (min. = 100, max. = FFFF FFFFh)

1800-00 PDO_TxCommParam_00h_REC

[Unsigned8, const]
These indices describe the communication attributes of the TPDO channels.
Mapping version and address information are provided. As a CN has only one
TPDO channel, only the first index

PDO_TxCommParam_XXh_REC

is

implemented on a CN. This sub-Index contains the number of entries.
Default = 2

1800-01 PDO_TxCommParam_00h_REC.NodeID_U8

[Unsigned8, ro]
It contains the Node ID of the PDO target. It is 0 (not used) for CNs.
Default = 0

1800-02 PDO_TxCommParam_00h_REC.MappingVersion_U8

[Unsigned8, ro]
Compatibility   of   TPDO   channels   and   corresponding   RPDO   channels   may   be
ensured   by   PDO   mapping   version   handling.   PDO   Mapping   can   be   variable
(configurable) or static (unchangeable). Variable mapping may be dynamically
modified   by   the   application,   even   under   operation.   Static   mapping   is   pre-
defined and may not be modified in any way. The version info is transmitted by
the Master or producer with every PDO transporting PReq and PRes frame. A

MAN EM58_HS58_HM58 PL E 1.1.odt

POWERLINK interface

78 of 108

«
...
76
77
78
79
80
...
»

Содержание POWERLINK EM58 PL













































































































Отзывы:

Нет отзывов

Похожие инструкции для POWERLINK EM58 PL

Бренд: Danfoss Страницы: 68

Бренд: 3onedata Страницы: 3

Бренд: Laser Страницы: 7

Бренд: Yamaha Страницы: 32

Бренд: Whistler Страницы: 2

Бренд: UNICOM Страницы: 1

Бренд: Peachtree Audio Страницы: 56

Бренд: Harman Kardon Страницы: 16

Бренд: CEL-MAR Страницы: 16

Бренд: Nexen Страницы: 13

Бренд: YASKAWA Страницы: 67

Бренд: Wavecrest Страницы: 39

Бренд: CYP Страницы: 16

Бренд: MOOD Страницы: 5

Бренд: Digitus Страницы: 4

Бренд: Goobay Страницы: 4

Бренд: Hoymiles Страницы: 2

Бренд: Microchip Technology Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды