EM58 • HS58 • HM58 POWERLINK
3.2 Hollow shaft encoders
3.2.1 EMC58, HSC58, HMC58
•
Fasten the anti-rotation pin
1
to the rear of the motor (secure it using a
locknut);
•
mount the encoder on the motor shaft using the reducing sleeve
8
(if
supplied). Avoid forcing the encoder shaft;
•
insert the anti-rotation pin
1
into the slot on the flange of the encoder; this
secures it in place by grub screw
2
, preset at Lika;
•
fix the collar
3
to the encoder shaft (apply some threadlocker to the screw
3
).
A = min. 8 mm, max. 18 mm
MAN EM58_HS58_HM58 PL E 1.1.odt
Mounting instructions
26 of 108
