Lika EM58 PA Series, Руководство пользователя

Страница: 38 / 60

EM58 PA
Default = CW (standard)
WARNING
After having set the new counting direction it is necessary to set also the preset
function.
Output type
It sets the type of the analogue output. Two options are available: VOLTAGE or
CURRENT. If
Output type
= VOLTAGE, the position information will be provided
through the +Vout output (see on page 23) and expressed in Volts (V); otherwise
if
Output type = CURRENT, the position information will be provided through
the +Iout output (see on page 22) and expressed in milliamperes (mA). The
output range options for either voltage type or current type can be set next to
the following
Output range
parameter. Please note that the analogue output
can be enabled / disabled by setting the
Enable analog output
parameter in
the same
ENCODER CONFIGURATION
box.
Default = voltage
Output range
After having enabled the analogue output by setting the Enable analog output
parameter and selected the type of output (voltage output or current output) by
setting the desired option (VOLTAGE or CURRENT) next to the previous
Output
type
parameter, scroll the drop-down list to choose between the available
output range options.
Default = 0 – 5 V
The following output range options are available for the current output (
Output
type
= CURRENT):
•
4 … 20 mA;
•
0 … 20 mA;
•
0 … 24 mA.
For any information refer to the “4.10 Current analogue output” section on page
22.
The following output range options are available for the voltage output (
Output
type
= VOLTAGE):
•
0 … 5 V;
•
0 … 10 V;
•
-5 … +5 V;
•
-10 … +10 V.
MAN EM58 PA E 1.1 Software and configuration parameters 38 of 60