EM58 PA
= 4,096, the encoder will provide a voltage level between 0 V (origin of
the travel, position 0) and 5 V (end of the travel, position 4,095). Then the
sequence will be repeated cyclically and a 0-5V ramp will follow a 0-5V ramp;
and so on.
NOTE
Please note that in this encoder the maximum number of physical counts per
turn is 4,096 (2
12
), while the maximum number of physical revolutions is 16,384
(2
14
); thus the overall number of information is 67 108 864 (2
26
). However the
DAC has a 16-bit (65,536 information) resolution, so the overall analogue
resolution will be limited to 16 bits.
Encoder HW counts
This parameter is available only when the
Programming mode: Prog (cyclic
is enabled.
It sets the length of the displacement you need to measure and control
expressed in encoder information (counts). When needed, calculate the portions
of a turn by considering the physical
. For instance: if the
axis travel is 1.5 turn long, enter: 4,096
*
1.5 = 6,144 counts.
Default = 67 108 864 (min. = 1, max. = 67 108 864)
MAN EM58 PA E 1.1
Software and configuration parameters
51 of 60
