Lika EM58 PA Series, Руководство пользователя

Страница: 44 / 60

EM58 PA
Programming mode: Start / Stop (cyclic ramp)
Press the button to enter the START / STOP (cyclic ramp) programming
mode and activate the relevant functions. In this mode the travel will be
defined in cyclic ramps
.
The START / STOP (cyclic ramp) programming mode allows to programme the
encoder by considering directly the physical travel of the application you need
to measure and control; the travel is defined in a ramp which is then repeated
cyclically: as soon as the the final position of the travel is reached, then the
minimum signal level of the selected range is output to start a new ramp; and
so on. The set output range (the overall information to be output which is set
next to the
Output range
item) is defined over the travel of the specific
application and is comprised between the ends of the axis: the origin of the axis,
i.e. the point where you press the
1 – Start teaching
button, and the end of
the axis, i.e. the point where you press the 2 - Stop teaching button. It is then
repeated cyclically.
Ramps follow each other. If you move the axis beyond the limits of the travel
you enter either the previous or the following ramp.
MAN EM58 PA E 1.1 Software and configuration parameters 44 of 60