EM58 PA
3.2 Encoder with hollow shaft
3.2.1 EMC58 PA installation using the antirotation pin
•
Fasten the anti-rotation pin
1
to the rear of the motor (secure it using a
locknut);
•
mount the encoder on the motor shaft using the reducing sleeve
8
(if
supplied). Avoid forcing the encoder shaft;
•
insert the anti-rotation pin
1
into the slot on the flange of the encoder; this
secures it in place by grub screw
2
, preset at Lika;
•
fix the collar
3
to the encoder shaft.
A = min. 8, max. 18 mm
MAN EM58 PA E 1.1
Mechanical installation
14 of 60
