EM58 PA
- minimize noise by connecting the shield and/or the connector housing
and/or the frame to ground. Make sure that ground is not affected by
noise. The connection point to ground can be situated both on the device
side and on user’s side. The best solution to minimize the interference
must be carried out by the user.
1.3 Mechanical safety
•
Install the device following strictly the information in the “Mechanical
installation” section on page 12;
•
mechanical installation has to be carried out with stationary mechanical
parts;
•
do not disassemble the unit;
•
do not tool the unit or its shaft;
•
delicate electronic equipment: handle with care; do not subject the device
and the shaft to knocks or shocks;
•
respect the environmental characteristics of the product;
•
unit with solid shaft: in order to guarantee the maximum reliability over
time of the mechanical parts, we recommend a flexible coupling to be
installed to connect the encoder and the installation shaft; make sure the
misalignment tolerances of the flexible coupling are respected;
•
unit with hollow shaft: the encoder can be mounted directly on a shaft
whose diameter has to respect the technical characteristics specified in the
purchase order and clamped by means of the collar and the fixing plate
into which an anti-rotation pin has to be inserted.
MAN EM58 PA E 1.1
Safety summary
10 of 60
