EM58 PA
Now you are ready to establish the connection to the encoder: press the
DEVICE
SEARCH
button in the
COM PORT
box. During the connection attempt a blue
arrow appears inside the
DEVICE SEARCH
button.
If the connection is established properly, a green tick (
√
) appears next to the
DEVICE SEARCH
button and the fields in the
ENCODER
box are filled with
information about the connected device. Furthermore the buttons in the left
navigation bar become active.
On the contrary, if the program is not able to establish a connection to the
encoder, a red X (
X
) appears next to the
DEVICE SEARCH
button.
Should this happen, please check that the unit is connected properly and the
power is on. Make sure the power supply voltage is correct. Also check that the
serial cable characteristics meet the requirements described in the “4.7 RS-232
serial connection” section on page 19.
WARNING
Make sure one only device is connected to the personal computer and switched
on when you start a device searching process!
MAN EM58 PA E 1.1
Software and configuration parameters
30 of 60
