EM58 PA
5.4 LOAD / SAVE CONFIGURATION page
When you press the
LOAD / SAVE CONFIGURATION
button in the left
navigation bar you enter the
LOAD / SAVE CONFIGURATION
page.
This page allows the operator to save the current encoder configuration to a
.dat file; or to load a previously saved configuration. The current encoder
configuration is listed in the box on the right.
5.4.1 Saving the encoder configuration to a file
To save the current encoder configuration just press the
SAVE NEW
CONFIGURATION TO FILE
button. As soon as you press the button the
Save as
dialogue box appears on the screen and the “Starting process...” message
appears on the display box below in the page. The operator must type the .dat
file name and specify the path where the file has to be located. When you press
the
SAVE
button to confirm, the dialogue box closes. If the process is carried out
properly, then the “- file created successfully; - file written correctly; ...process
carried out” message appears on the display box. Otherwise the
warning message appears on the display box.
MAN EM58 PA E 1.1
Software and configuration parameters
54 of 60
