Lika EM58 PA Series, Руководство пользователя

Страница: 23 / 60

EM58 PA
This encoder allows to choose between the following current output range
options (
Output type = CURRENT):
Application range
Output range
minimum position maximum position
4 mA ... 20 mA 4 mA 20 mA
0 mA … 20 mA 0 mA 20 mA
0 mA … 24 mA 0 mA 24 mA
When the default parameters are set (EM5812/16384PA), increments per each
step are as follows:
0.244 µA if Output range = 4 mA ... 20 mA
0.305 µA if Output range = 0 mA … 20 mA
0.366 µA
if
Output range
= 0 mA … 24 mA
4.11 Voltage analogue output
+Vout delivers the voltage analogue signal.
After having enabled the analogue output by setting the
Enable analog output
parameter in the
ENCODER CONFIGURATION
box of the
CONFIGURATION
page, the user is allowed to choose the type of output (either current or voltage)
by setting the desired value (CURRENT or VOLTAGE) next to the
Output type
parameter in the same box; then he has to set the output range by means of the
drop-down list in the following parameter
Output range
.
This encoder allows to choose between the following voltage output range
options (
Output type = VOLTAGE):
Application range
Output range
minimum position maximum position
0 V ... +5 V 0 V +5 V
0 V ... +10 V 0 V +10 V
- 5 V … +5 V -5 V +5 V
-10 V … +10 V -10 V +10 V
MAN EM58 PA E 1.1 Electrical connection 23 of 60