LIFE home integration GENIUS GE 224 Скачать руководство пользователя страница 43

Страница: 43 / 64

Il test è selettivo, viene effettuato solo sulle
fotocellule selezionate.
Le applicazioni possono essere: FOTO;
FOTO e FOTO 1; FOTO, FOTO 1 e FOTO 2.

Per programmare il test delle fotocellule
installate, dopo aver selezionato la funzione
<

FOTO TEST

>, agire sui tasti <

> o <

Premendo i tasti si accendono i led sulla barra
superiore (da 1 a 5):

led 1 acceso: attiva il test su FOTO.

led 1 e 2 accesi: attiva il test su FOTO e
FOTO 1.

led 1, 2 e 3 accesi: attiva il test su FOTO,
FOTO 1 e FOTO 2.

ATTENZIONE: è importante impostare
correttamente il <FOTO TEST> per evitare
che siano testate fotocellule non presenti
e il controllo evidenzi l’anomalia.

8.3.5 SELETTORE FOTO 1

Il selettore <

FOTO 1

> ha la funzione di

impostare la fotocellula interna durante le fasi
di apertura o chiusura.

Per definire la funzione premere il tasto
<

TASTIERA DESTRA

> e poi il tasto <

I led (7 e 9) visualizzano lo stato in questo
modo:

led verde (7) acceso: funzione impostata
in modalità <

>. Se durante la fase di

apertura o di chiusura viene interrotto il
fascio della fotocellula interna il cancello
si arresta. Il moto è ripreso in apertura
quando si disimpegna la fotocellula

led rosso (9) acceso: funzione impostata
in modalità <

OFF

>. In fase di apertura non

interviene; In fase di chiusura determina
l’inversione del moto del cancello fino
all’apertura.

Premendo il tasto della funzione <

TASTIERA

DESTRA

> s’inverte lo stato della selezione

OFF/ON.

8.3.6 SELETTORE CHIUDE

PASSANDO

Il selettore <

CHIUDE PASSANDO

> ha la

funzione di abilitare la chiusura automatica
del cancello dopo l’attraversamento del fascio
della fotocellula esterna.

Per definire la funzione premere il tasto
<

TASTIERA DESTRA

> e poi il tasto <

I led (7 e 9) visualizzano lo stato in questo
modo:

led verde (7) acceso: funzione impostata
in modalità <

>. Dopo l’interruzione del

fascio della fotocellula esterna e un tempo
di attesa di alcuni secondi, il cancello si
richiude automaticamente. Quando il
cancello è aperto memorizza un comando
di chiusura generato dalla fotocellula.

led rosso (9) acceso: funzione impostata
in modalità <

OFF

>. Funzione disattivata.

Premendo il tasto della funzione <

TASTIERA

DESTRA

> s’inverte lo stato della selezione

OFF/ON.

The test is selective, it is only conducted on
the selected photocells.
The applications can be: PHOTO; PHOTO
and PHOTO 1; PHOTO, PHOTO 1 and
PHOTO 2.

In order to program the test of the photocells
installed, having selected the <

PHOTO

TEST

> function use the <

> or <

> keys. By

pressing the keys the leds on the top bar light
(from 1 to 5):

led 1 lit: test enabled on PHOTO.

led 1 and 2 lit: test enabled on PHOTO
and PHOTO 1.

led 1, 2 and 3 lit: test enabled on PHOTO,
PHOTO 1 and PHOTO 2.

ATTENTION: it is important to set
<PHOTOTEST> correctly in order to
prevent testing photocells not present and
the check detecting the abnormality.

8.3.5 PHOTO 1 SELECTOR

The

<PHOTO 1

> selector has the function of

setting the internal photocell during opening
or closure phases.

To define the function press the <

RIGHT

KEYBOARD

> key and then the <

> key.

The leds (7 and9) display the status in this
way:

green led (7) on: function set in <

mode. If during the opening or closure
phase the internal photocell beam is
interrupted, the gate stops. Movement
recommences in opening when the
photocell is disengaged.

red led (9) on: function set in <

OFF

mode. It does not intervene during
opening, during closure it causes the
inversion of the gate’s movement to
opening.

By pressing the

<RIGHT KEYBOARD

> key

the status of OFF/ON selection is inverted.

8.3.6 CLOSE AFTER PHOTO

SELECTOR

The

<CLOSE AFTER PHOTO

> selector has

the function of enabling the automatic closure
of the gate after the crossing of the external
photocell beam.

To define the function press the

<RIGHT

KEYBOARD

> key and then the <

> key.

The leds (7 and 9) display the status as
follows:

green led (7) on: function set in <

mode. After the interruption of the beam
of the external photocell and a wait time
of a few seconds, the gate closes
automatically. When the gate is open, it
memorises a closure command
generated by the photocell.

red led (9) on: function set in <

OFF

mode. Function deactivated.

By pressing the

<RIGHT KEYBOARD

> key

the status of ON/OFF selection is inverted.

Es handelt sich um eine selektive Kontrolle, d. h.

sie wird nur für die ausgewählten Lichtschranken

durchgeführt. Es können folgende Einstellungen

ausgewählt werden: LICHTSCHRANKE;

LICHTSCHRANKE und LICHTSCHRANKE 1;

LICHTSCHRANKE, LICHTSCHRANKE 1 und

LICHTSCHRANKE 2.

Um die Kontrolle der installierten Lichtschranken

zu programmieren, drücken Sie zuerst die Taste

LICHTSCHRANKENTEST

> und danach die

Tasten <

> oder <

>. Wenn diese Tasten gedrückt

werden, leuchten die LED-Anzeigen auf der oberen

Tastatur oben (von 1 bis 5) auf:

Bei Leuchten der LED-Anzeige 1: die Kontrolle

für die LICHTSCHRANKE ist in Betrieb.

Bei Leuchten der LED-Anzeigen 1 und 2: die

Kontrolle für die LICHTSCHRANKE und

LICHTSCHRANKE 1 ist in Betrieb.

Bei Leuchten der LED-Anzeigen 1, 2 und 3:

die Kontrolle für die LICHTSCHRANKE,

LICHTSCHRANKE 1 und LICHTSCHRANKE

2 ist in Betrieb.

ACHTUNG: Die richtige Einstellung des

Schalters <LICHTSCHRANKENTEST> ist

überaus wichtig, um zu vermeiden, dass nicht

vorhandene Lichtschranken kontrolliert werden
und die Kontrolle eine Fehlfunktion meldet.

8.3.5 SCHALTER

LICHTSCHRANKE 1

Der Schalter <

LICHTSCHRANKE 1

> hat die

Funktion, die innere Lichtschranke während der

Öffnungs- und Schließvorgänge zu steuern.

Um die Funktion zu aktivieren, drücken Sie die Taste

RECHTE TASTATUR

> und dann die Taste <

Die LED-Anzeigen (7 und 9) geben den Status

folgendermaßen an:

leuchtende grüne LED-Anzeige (7): Funktion

auf <

> eingestellt. Wenn während des

Öffnungs- oder Schließvorgangs der Strahl der

inneren Lichtschranke unterbrochen wird, hält

das Tor an. Wenn die Lichtschranke wieder

freigegeben ist, wird die Öffnungsbewegung

aufgenommen.

leuchtende rote LED-Anzeige (9): Funktion auf

OFF

> eingestellt. Die Funktion tritt beim

Öffnungsvorgang nicht in Betrieb. Beim

Schließvorgang wird die Laufrichtungsumkehr

des Tors bis zur Öffnung bestimmt.

Bei Drücken der Taste <

RECHTE TASTATUR

wird der OFF/ON-Modus gewechselt.

8.3.6 SCHALTER SCHLIESSUNG

NACH FREIGABE

Der Schalter <

SCHLIESSUNG NACH

FREIGABE

> hat die Funktion, die automatische

Torschließung nach der Freigabe der äußeren

Lichtschranke zu steuern.

Um die Funktion zu aktivieren, drücken Sie die Taste

RECHTE TASTATUR

> und dann die Taste <

Die LED-Anzeigen (7 und 9) geben den Status

folgendermaßen an:

leuchtende grüne LED-Anzeige (7):

Funktion auf <

> eingestellt. Nach der

Unterbrechung des Strahls der äußeren

Lichtschranke und nach einigen

Sekunden Wartezeit schließt das Tor

automatisch. Wenn das Tor geöffnet ist,

wird ein von der Lichtschranke erzeugter

Schließbefehl gespeichert.

leuchtende rote LED-Anzeige (9):

Funktion auf <

OFF

> eingestellt. Die

Funktion ist deaktiviert.

Bei Drücken der Taste <

RECHTE

TASTATUR

> wird der OFF/ON-Modus

gewechselt.

Содержание GENIUS GE 224

































































Результаты поиска

Содержание GENIUS GE 224

Отзывы:

Похожие инструкции для GENIUS GE 224

Бренды по названию

Популярные бренды

LIFE home integration GENIUS GE 224, Инструкции и указания по установке, использованию и обслуживанию

Результаты поиска

Содержание GENIUS GE 224

Отзывы:

Похожие инструкции для GENIUS GE 224

Бренды по названию

Популярные бренды