LG 42LY770M страница 46 Скачать руководство пользователя

Страница: 46 / 104

206-4271

Custom Master TV Setup

This section describes how to create a customized Master TV Setup for cloning purposes when

the TV is in Pass-through Mode. All cloning (Learning and Teaching) processes on the TV are

performed via USB memory device / TLX file.

The Master TV Setup may be Learned to a TLX file,

which can then be used to Teach configuration either to TVs that are to remain in Pass-through

Mode or to TVs that are to be configured for FTG Mode via CPU.

Note:

Cloning requirements and procedures are described in detail on pages 53 to 58.

Note:

You can use the FTG File Manager to create an FTG Configuration (.tlx) file for FTG

Mode via CPU configuration/cloning purposes, if desired (see pages 59 to 60). However, it is not

possible to customize TV setup menu settings in the FTG File Manager. If you wish to include

customized TV setup menu settings in the TV configuration, in addition to the channel lineup and

Installer Menu settings, perform the Master TV Setup procedure to create the configuration file.

Before You Begin

• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel

Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.

•

A TLX file comprises Installer Menu settings, IP Environment Menu settings (with the exception

of unique TV attributes and settings), and all TV sources’ (analog, digital, AV1, HDMI, etc.) clonable

setup menu settings. See also “Clonable TV Setup Menu Features” list below.

•

If the TLX file to be used for Teaching configuration contains an FTG Channel Map (created

during Master TV Setup or in FTG File Manager), the Target TV(s) will be configured for FTG

Mode via CPU after Teaching is performed, though as part of the Teaching process, depending

on the types of channels included in the Channel Map, you may have the option to select either

logical or physical channel tuning. If you woulf like the Target TV(s) to remain in Pass-through

Mode, the TLX file should not include an FTG Channel Map

Clonable TV Setup Menu Features

Quick Settings

Channels

Picture Mode

Sound Mode

Picture

Picture Mode

Picture Adjust

Sound

Sound Mode

Sound Effects

Volume Mode

AV Sync. Adjust

Accessibility

Pointer Options

Closed Captions

General

Language

Time & Date

−

Clock Mode (Auto/Manual)

−

Time Zone

Timers (No Signal Power Off)

Standby Light

Note:

Some menu options vary between analog and digital channels and Aux inputs.

Содержание 42LY770M









































































































Результаты поиска

Содержание 42LY770M

Отзывы:

Похожие инструкции для 42LY770M

Бренды по названию

Популярные бренды

LG 42LY770M, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 42LY770M

Отзывы:

Похожие инструкции для 42LY770M

Бренды по названию

Популярные бренды