LG 42LY770M страница 14 Скачать руководство пользователя

Страница: 14 / 104

206-4271

EZ-Manager Wizard

Initiate the EZ-Manager Wizard

After you select the “EZ-Manager” option from the Setup Wizard Welcome screen, an EZ-Manager

Welcome screen provides a brief introduction to the EZ-Manager Wizard.

Note:

Each EZ-Manager Wizard step is allotted a time frame after which the wizard proceeds

without user interaction.

If the Pro:Centric server is configured on the system and if no location-

specific settings are required in the TV, for example, TV Zone, Wi-Fi Zone, Label, and/or Room

Number settings, from this point, the wizard can proceed through each of the configuration steps

with no further user interaction.

WELCOME TO LG’S EZ-MANAGER WIZARD

EXIT

NO PRO:CENTRIC

Use this setup wizard to configure the TV for Pro:Centric and/or Free-To-Guest (FTG) operation.

Select NEXT to continue.

If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this TV for FTG

Mode, you may exit the wizard.

Select NO PRO:CENTRIC to disable the Pro:Centric feature of this TV, or select EXIT to quit.

This setup wizard will start automatically in 10 seconds.

Note:

If there is no user action in this screen within 10 seconds, the wizard will proceed to the next

configuration step. Once the wizard has proceeded, it is not possible to return to the EZ-Manager

Welcome screen; however, if you simply wish to exit the wizard, you can do so by selecting the

“EXIT” button from the subsequent screen(s).
From the EZ-Manager Welcome screen, you have the following options:
• To proceed with the EZ-Manager Wizard, use the arrow keys on the Installer Remote to select

NEXT

, and then press

Then, continue to the “TV Configuration Options” section on the

following page.

• To exit the EZ-Manager Wizard, but retain the use of the Pro:Centric remote management

feature on this TV (i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use

the arrow keys on the Installer Remote to select

EXIT

, and then press

. In the confirmation

pop-up window, select

, and then press

once more on the Installer Remote.

• If you do not intend to install a Pro:Centric server on this system and you do not wish to use the

wizard’s Zoning or USB configuration options, exit the wizard as follows: Use the arrow keys

on the Installer Remote to select

NO PRO:CENTRIC

, and then press

. This will disable the

Pro:Centric feature of this TV (i.e., Installer Menu item 119 DATA CHANNEL will be set to 0) and

exit the wizard. In the confirmation pop-up window, select

, and then press

once more on

the Installer Remote.

Содержание 42LY770M









































































































Результаты поиска

Содержание 42LY770M

Отзывы:

Похожие инструкции для 42LY770M

Бренды по названию

Популярные бренды

LG 42LY770M, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 42LY770M

Отзывы:

Похожие инструкции для 42LY770M

Бренды по названию

Популярные бренды