manualshive.com logo in svg

LG 42LY770M, Руководство по настройке коммерческого режима, Страница: 87 / 104

Поделиться
Скачать
LG 42LY770M Скачать руководство пользователя страница 87

87

206-4271

Reference: Using the TV’s Zoning Features (Cont.)

Using the Wi-Fi Zoning Feature with Cloning Configuration

A location-specific Wi-Fi configuration / TLX file may be saved (Learned) from an individual TV as part of a 

Master TV Setup and then be used during Teaching. First, the wireless network (i.e., the access point login 

data) must be configured in the Master TV’s IP Environment Menu (see “Configuring a Wi-Fi Network 

 

Connection” on page 69). Then, a Wi-Fi Zone # must be set in the Master TV (see “Set the TV Zone # 

and/or Wi-Fi Zone # in the TV” below). If desired, a TV Zone # may also be set in the Master TV. 
For example, if the Wi-Fi Zone # is set to 4 and the TV Zone # is set to 5 before Learning is initiated, after 

Learning is completed, the Master TV’s Installer Menu profile will be saved with the Zone 5 assignment, and 

within that Installer Menu profile, the access point login data for wireless networking 

(i.e., SSID, security 

type, and security key) 

will be saved with a Wi-Fi Zone 4 assignment. In order to configure the Target TVs 

with the proper Installer Menu profile and access point login data, you must set both the TV Zone # and the 

Wi-Fi Zone # in the Target TVs accordingly before transferring (Teaching) the Master TV Setup. See “Set 

the TV Zone # and/or Wi-Fi Zone # in the TV” below. Also, see “Cloning Procedures” on pages 53 to 58 for 

additional information on the cloning processes. If the Wi-Fi Zone # in the TV is set to 0 (default), the TV will 

not obtain access point login data from the Installer Menu profile with which it is configured unless the profile 

contains the global Wi-Fi Zone 100. Similarly, any TV that does not find its matching Wi-Fi Zone # in the TLX 

file, but that does find the global Wi-Fi Zone 100, will be configured with the global access point login data

.

Set the TV Zone # and/or Wi-Fi Zone # in the TV

You can set the TV Zone # and/or the Wi-Fi Zone # in the EZ-Manager Wizard (see “EZ-Manager Wizard” 

on pages 14 to 22) or, if the TV is in Pass-through Mode, via the TV’s setup menus as described below. 

Note that the following procedure can only be performed while the TV is in Pass-through Mode. You will also 

be able to specify a Label (North, South, East, West) and Room Number for this TV, if desired.  
1.  Turn ON the TV.
2.  Press 

MENU 

on the Installer Remote, and use the arrow navigation keys to select/highlight the 

General

 

menu option. Then, press 

OK

.

3.  In the General Menu, use the Up/Down arrow keys to select 

Room Info

, and then press 

OK

.

4.  In the Room Info screen, complete the appropriate fields as described below. Use the 

Up/Down arrow 

keys on the Installer Remote to navigate between each of the fields.

• 

Wi-Fi Zone: Enables you to set a Wi-Fi Zone # so that the TV can be configured with a particular 

 

access point’s login data for wireless networking. Login data (i.e., SSID, security type, and security 

key) may be provided in a TLX file. 

To assign a Wi-Fi Zone, select/highlight the 

Wi-Fi Zone

 field and press 

OK

. Then, use the Left/Right 

arrow keys to specify the desired Wi-Fi Zone # (1–99). Press 

OK

 when you are finished.

•  TV 

Zone: Enables you to set a TV Zone # so that the TV can be configured with Installer Menu and/

or TV Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or TV Setup 

Menu settings may be provided in a TLX file

. 

If the TV is being configured for FTG Mode via CPU, the 

TV Zone # setting also allows the TV to omit channels that have been restricted in the FTG Channel 

Map (see “FTG Channel Map Zone Restrictions” on page 85). 
To change the TV Zone, select/highlight the 

TV Zone

 field and press 

OK

. Then, use the Left/Right 

arrow keys to specify the desired TV Zone # (0–8). Press 

OK

 when you are finished

.

(Continued on next page)

Содержание 42LY770M









































































































Отзывы:

Нет отзывов