LG 42LY770M страница 17 Скачать руководство пользователя

Страница: 17 / 104

206-4271

EZ-Manager Wizard (Cont.)

Configure Pro:Centric Settings

Once you select “NEXT

” from the TV Configuration Options screen, the Searching for Pro:Centric

Server screen is displayed.

Note:

Select the “BACK” button, where available, to check previous settings, as necessary. Also

note that if any of the configuration steps fails, you will see a “Diagnostics” screen with an indication

of the failure. You will then have the opportunity to reinitiate the configuration process from the

previous screen or exit the EZ-Manager Wizard.

SEARCHING FOR PRO:CENTRIC SERVER...

EXIT

It may take 2 min 51 second(s).

This step automatically searches for the Pro:Centric Server.
If there is no Pro:Centric server installed, you do not need to continue with this procedure.
Please select either EXIT or MANUAL PRO:CENTRIC.

Status: Tuning channel 30

TV is now searching the pre-defined channels for the data channel...

MANUAL PRO:CENTRIC

BACK

You have the following options:
•

You can allow the EZ-Manager Wizard to proceed with a series of automated steps to configure

the TV for Pro:Centric operation and then to look for the Pro:Centric application and maintenance

(E-Z Installation) files to download. In this case, the wizard uses a search algorithm to determine

the Data Channel and the Pro:Centric Application Mode to set in the TV.

Continue with the “Automated Pro:Centric Configuration” subsection below.

• If you already know the settings (i.e., Data Channel and Pro:Centric Application Mode) that need

to be configured in order for the TV to connect to the Pro:Centric server and/or if the Pro:Centric

server is not yet installed, you may expedite the setup process by entering this data manually.

Continue with the “Manual Pro:Centric Configuration” subsection on page 19.

Automated Pro:Centric Configuration

Note:

the server is not yet configured on the system, use the manual configuration option to

configure the Pro:Centric operation. See also note below.

Note:

If Pro:Centric data delivery will be over IP and there is a DNS server at the site, you can

create a DNS entry “procentric.local” for the Pro:Centric server that will enable automated

Pro:Centric IP configuration via the EZ-Manager. If there is no DNS entry for procentric.local, you

must

use the manual configuration option to configure the Pro:Centric IP operation.

Once the Pro:Centric data channel is found (a Pro:Centric Server Was Found screen will be

displayed) and the Pro:Centric Application Mode is determined, the wizard will advance to the

Processing the Pro:Centric Configuration screen, which shows the progress of the data

downloads (see example on following page). Note that some steps may require a few minutes.

Содержание 42LY770M









































































































Результаты поиска

Содержание 42LY770M

Отзывы:

Похожие инструкции для 42LY770M

Бренды по названию

Популярные бренды

LG 42LY770M, Руководство по настройке коммерческого режима

Результаты поиска

Содержание 42LY770M

Отзывы:

Похожие инструкции для 42LY770M

Бренды по названию

Популярные бренды