Lexmark XC2130 Скачать руководство пользователя страница 252

Страница: 252 / 344

Configuration change, some held jobs were not restored [57]

Held jobs are invalidated because of any of the following possible changes in the printer:

•

The printer firmware has been updated.

•

The tray for the print job is removed.

•

The print job is sent from a flash drive that is no longer attached to the USB port.

•

The printer hard disk contains print jobs that were stored when the hard disk was installed in a different printer
model.

Note:

The printer hard disk and the flash drive are supported only in select printer models.

From the printer control panel, select

Continue

to clear the message. For non-touch-screen printer models, press

to confirm.

Defective flash detected [51]

Try one or more of the following:

•

Replace the defective flash memory card.

•

From the printer control panel, select

Continue

to ignore the message and continue printing. For non

‑

touch

‑

screen

printer models, press

to confirm.

•

Cancel the current print job.

Disk full [62]

Try one or more of the following:

•

From the printer control panel, touch

Continue

to clear the message and continue processing.

•

Delete fonts, macros, and other data stored in the printer hard disk.

•

Install a printer hard disk with larger capacity.

Disk must be formatted for use in this device

From the printer control panel, touch

Format disk

to format the printer hard disk and clear the message.

Note:

Formatting deletes all the files stored in the printer hard disk.

Error reading USB drive. Remove USB.

An unsupported USB device is inserted. Remove the USB device, and then insert a supported one.

Error reading USB hub. Remove hub.

An unsupported USB hub has been inserted. Remove the USB hub, and then install a supported one.

Incompatible tray [x] [59]

Remove, and then reinstall the indicated tray to clear the message.

Troubleshooting

252

Содержание XC2130

























































































































































































































































































































































Результаты поиска

Содержание XC2130

Отзывы:

Похожие инструкции для XC2130

Бренды по названию

Популярные бренды

Lexmark XC2130, Руководство пользователя

Результаты поиска

Содержание XC2130

Отзывы:

Похожие инструкции для XC2130

Бренды по названию

Популярные бренды