Leviton 24/48, Руководство пользователя

Страница: 88 / 256

Chapter 5 Cues
Page 76 Rev. 1.30.03.07.r1
Multipart Cues
Multipart cues allow you to have up to eight simultaneously executing
separate cue parts in one main cue. Each part contain it’s own channel
levels along with fade times and delay times. By using individual delay
times for each part you can program fades that start at different times
within the main cue. Split fades and split delay times are also possible in
each cue part, see Figure 5.1 below.
You can also assign a group to a cue part, see the
Using Groups when
Recording Cues
section earlier in this chapter.
A channel can be included in only one part of a multipart cue. If a
channel has been recorded in one part and then you record the same
channel in a new part, the channel will be automatically removed from
the previous part.
Cue Parts Split Fade and Delay Times
Figure 5.1 Cue Parts
Please follow the step by step example on the following page to re-create
the above multipart cue in Figure 5.1.