Leviton 24/48, Руководство пользователя

Страница: 121 / 256

User Guide Chapter 6 Groups
Rev. 1.30.03.07.r1 Page
Using the Only Key with Groups
The Only key is very useful when working with Groups. It can be used to
select "only" a channel or selection of channels from within a group. This
selection could be used to record other groups, subs, or cues. For example,
to select channels from a group live from the Stage display:
Procedure: Notes :
1. Press [STAGE]
2. Press [GROUP] [20] Group 20 has channels 1 - 24
already recorded
3. Press [ONLY]
4. [5] [THRU] [10]
5. [FULL] or enter a level Only channels 5 - 10
using [AT] [#] appear on screen
By using Only you can also select certain devices from a group of devices.
For example, if group 5 contained pan and tilt trait levels for devices 1
through 8 you could select only the pan and tilt trait levels for device 3 and
record them into another group:
Procedure: Notes :
1. Press [DEVICE] display key Opens Device display
2. Press [GROUP] [5]
3. Press [ONLY] [DEVICE] [3] Use Device key on
[ENTER] keypad
4. Use Trackball to place cursor Trait captured for record
over device 3 trait name and when white
press [SELECT] to highlight
5. Press [RECORD GROUP] [6]
6. Press [ENTER] Only device 3 pan and
tilt positions are
recorded to group 6
Alternatively in step 4, you could press [DEVICE] [3] [ENTER] and adjust
the pan and tilt traits by using the trackball or encoder wheels.
To release traits so that they will not be recorded, press
(RelAll) . See
Chapter 10 Automated Devices
for more information on working with
devices.