Leviton 24/48, Руководство пользователя

Страница: 56 / 256

Chapter 4 Submasters
Page 44 Rev. 1.30.03.07.r1
Timed Submasters
You can assign fade times to bump buttons which control the fade up and
fade down time of the submaster. Then, when you press and hold the
submaster bump button, it will fade to 100% over the time period you
entered, and once the button is released, it will fade to 0% over the time
period you entered.
Additionally, you can enter a dwell time for a submaster. The dwell time
specifies the time from when you either release the bump button or the up
fade is complete until the time when the down fade starts. When a dwell
time is entered for a submaster, you can simply tap the bump button to
initiate a fade up, dwell, then fade down sequence. For example, if you had
submaster 8 programmed with a fade up time of 3 seconds, a dwell of 5
seconds, and a fade down time of 1 second, when you tapped the bump
button the submaster would fade to 100% over a time of 3 seconds, it
would pause for 5 seconds and then fade to 0% over 1 second.
Fade and Dwell times are assigned from the Submaster sub-display of
Preview and are shown in the "Time" and "Dwl information field.
F
ollow this example
to assign a 4 second up time and a 5 second down time:
Procedure: Notes :
1. Press [PREVIEW]
2. Press (SelSub) [#]
3. Press [TIME] [4] [AND] [5] [ENTER] The [AND] key is used to
specify individual up and down
fade times.
You can also record a fade time as you record a submaster live:
Press [RECORD SUB] [#] [TIME] [#] [ENTER]
F
ollow below
to assign a 3 second fade time and a 6 second dwell time:
Procedure: Notes :
1. Press [PREVIEW]
2. Press (SelSub) [#]
3. Press [TIME] [3]
4. Press [DELAY] [6] [ENTER] The [DELAY] hard-key is used
to set the Dwell time for a sub
You can also record a dwell time as you record a submaster live:
Press [RECORD SUB] [#] [DELAY] [#] [ENTER]