Leviton 24/48, Руководство пользователя

Страница: 164 / 256

Chapter 10 Automated Devices
Page 152 Rev. 1.30.03.07.r1
Custom Device Address Assignment
In the previous procedure, when the initial assignment was first made, the
console looked at its patch tables and assigned the device to the first
dimmer address that was not assigned to a conventional channel and has
enough unpatched consecutive channels following for the number of
channels required for the device. This may not be the address you wish the
fixture to respond to. If not, then the next step in making an assignment is
setting a new start address. In this step, two decisions must be made: First,
is what port from the console is to be used. Second, is what the starting
address of the selected device will be. Follow the steps below to assign a
new starting address and port while in the Device Assignment sub-display:
Procedure: Notes:
1. Use arrow keys to highlight the
device dimmer number
2. Use keypad to enter the desired
starting address
3. Press [ENTER] Confirms assignment
4. Use arrow keys to highlight the port
5. Press
[A] [B] or [C] to select Use the submaster bump
desired port (if necessary) button keys for letters
6. Press [ENTER] Confirms assignment
Clearing a Device Assignment
Whereas from show to show, conventional lighting assignments may
change, the addressing of the automated devices tends to be more of a
constant. Therefore, when you clear the console memory or the console
patch, the assignment of devices is NOT cleared. These assignments are
cleared from the Device Assignment screen of the Setup display. For more
information on clearing conventional lighting assignments see
Chapter 9
Patching
and
Chapter 11 Memory Functions
.
The following steps show how to clear a device assignment:
Procedure: Notes:
1. Press [SETUP] (Device)
2. Use arrow keys to highlight the
desired device number to be cleared
3. Press [2] Device menu item 2:
"Clear Assignment".
4. Press [ENTER] to confirm