Leviton 24/48, Руководство пользователя

Страница: 21 / 256

User Guide
Chapter 1 Introduction
Rev. 1.30.03.07.r1 Page 9
Enter Key
The [ENTER] key is used to execute console commands including those
entered into the command line. Pressing [ENTER] will also capture all
channels above zero and place them under trackball control.
Clear Key
The [CLEAR] key is used to clear keystrokes entered into the command
line, release all captured channels, or abort actions after receiving a
warning message.
And, Thru, Minus, Only Keys
The [AND] , [THRU] , [MINUS] and [ONLY] keys are used when entering
channel list data, see
Chapter 3 Setting Channel Levels
. The [ONLY] key is
also used when working with groups, see
Chapter 6 Groups
.
Part, Time, Delay, Follow, Link Keys
The [PART] , [TIME] , [DELAY] , [FOLLOW] , and [LINK] keys are used
to record different cue attributes, see
Chapter 5 Cues
.
Record Cue, Record Group, Record Sub Keys
The [RECORD CUE] , [RECORD GROUP] and [RECORD SUB] keys are
used when recording cues, groups or submasters. For more information,
refer to
Chapter 4 Submasters, Chapter 5 Cues
and
Chapter 6 Groups .
Cue, Group, Sub, Effect Keys
The [CUE] , [GROUP] , [SUB] AND [EFFECT] keys are used for recall of
the respective recorded memories. See
Chapter 4 Submasters, Chapter 5
Cues, Chapter 6 Groups
and
Chapter 7 Effects .
Device Key
The [DEVICE] key is used to select an assigned device(s) for trait
adjustment with the encoder wheels or trackball. See
Chapter 10
Automated Devices
for more information.
Profile Key
The [PROFILE] key is used to assign a dimmer profile to a dimmer, see
Chapter 9 Patching .