Lenovo x3250 m6, Инструкция по установке и обслуживанию

Страница: 56 / 696

Example that does use the user ID and password default values:
onecli config set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value>
• Bootable media:
You can also build a bootable medium using the applications available through the ToolsCenter
Web site at https://support.lenovo.com/us/en/documents/LNVO-CENTER. From the
ToolsCenter page, scroll down for the available tools.
Step 5. Restart the server.
Updating the DMI/SMBIOS data
The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use the
Lenovo ToolsCenter Suite CLI to update the DMI in the UEFI-based server. Lenovo ToolsCenter Suite CLI is
an online tool that supports several operating systems. Make sure that you download the version for your
operating system. You can download Lenovo ToolsCenter Suite CLI from the Lenovo Web site. To download
Lenovo ToolsCenter Suite CLI and update the DMI, do the following:
Note: Changes are made periodically to the Lenovo Web site. The actual procedure might vary slightly
from what is described in this document.
Step 1. Go to https://support.lenovo.com/us/en/documents/LNVO-TCLI. Then, find and download the
Lenovo ToolsCenter Suite CLI version for your operating system.
Step 2. Lenovo ToolsCenter Suite CLI sets the DMI in the Integrated Management Module II (IMM2). Select
one of the following methods to access the Integrated Management Module II (IMM2) to set the DMI:
• Online from the target system, such as LAN or keyboard console style (KCS) access
• Remote access to the target system (LAN based)
• Bootable medium containing the Lenovo ToolsCenter Suite CLI (LAN or KCS, depending upon
the bootable media)
Step 3. Copy and unpack the Lenovo ToolsCenter Suite CLI package, which also includes other required
files, to the server. Make sure that you unpack the Lenovo ToolsCenter Suite CLI and the required
files to the same directory. In addition to the application executable (Lenovo ToolsCenter Suite CLI
or Lenovo ToolsCenter Suite CLI64), the following files are required:
• For Windows based operating systems:
– ibm_rndis_server_os.inf
– device.cat
• For Linux based operating systems:
– cdc_interface.sh
Step 4. After you install Lenovo ToolsCenter Suite CLI, type the following commands to set the DMI:
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
Where:
<m/t_model>
The server machine type and model number. Type
mtm xxxxyyy
, where xxxx is the machine
type and yyy is the server model number.
<s/n>
The serial number on the server. Type
sn zzzzzzz
, where zzzzzzz is the serial number.
<asset_method>
42
Lenovo System x3250 M6 Installation and Service Guide