Lenovo x3250 m6 Скачать руководство пользователя страница 59

Страница: 59 / 696

8. If necessary, repeat step 7 to select multiple hard disk drives.

9. Use the arrow keys to select a stripe size in the

Stripe Size

field and press Enter.

10. Type a volume size in the

Capacity (MB)

field and press Enter.

11. Select

Create Volume

and press Enter.

12. When prompted, press Y to accept the warning message and create the volume.

13. If desired, return to step 4 to create additional RAID volumes.

Deleting RAID volumes

This section describes how to use the Intel Rapid Storage Technology enterprise UEFI HII to delete RAID
volumes.

To delete RAID volumes, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 29.

2. Select

System settings

➙

Storage

and press Enter.

3. Select

Intel RSTe SATA Controller

and press Enter.

4. Use the arrow keys to select the RAID volume to be deleted in the

RAID Volume

field and press Enter.

5. Select

Delete

and press Enter.

6. When prompted, press Y to confirm the deletion of the selected RAID volume. Deleting a RAID volume

will reset the hard disk drives to non-RAID.

7. After deleting a RAID volume, you can:

• Return to step 4 to delete additional RAID volumes.

• See “Creating RAID volumes” on page 44 for RAID volume creation.

• Exit the Setup Utility program.

Marking disks as spare

To mark hard disk drives as spare drives, do the following:

1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 29.

2. Select

System settings

➙

Storage

and press Enter.

3. Select

Intel RSTe SATA Controller

and press Enter.

4. Use the up and down arrow keys to select a Non-RAID physical disk in the

Non-RAID Physical Disks

field and press Enter.

5. Select

Mark as Spare

and press Enter.

6. When prompted, press Y to confirm the operation.

Note:

Marking a hard disk drive as a spare drive will remove all data on the drive.

Notes:

If your server has one of the following Linux operating systems installed, continue with the

corresponding actions:

• For the Redhat Enterprise Linux 6.7 operating system, add the following line to the end of the

/etc/mdadm.conf

file and restart the operating system.

POLICY domain=DOMAIN path=* metadata=imsm action=spare-same-slot

• For the SUSE Linux Enterprise Server 11.4 operating system, do the following:

1. Add the following line to the end of the

/etc/mdadm.conf

file.

POLICY domain=DOMAIN path=* metadata=imsm action=spare-same-slot

2. Run the following commands as a root user.

# chkconfig –s mdadmd on
# /etc/init.d/mdadmd start

Chapter 4

Configuration information

Содержание x3250 m6

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание x3250 m6

Отзывы:

Похожие инструкции для x3250 m6

Бренды по названию

Популярные бренды

Lenovo x3250 m6, Инструкция по установке и обслуживанию

Результаты поиска

Содержание x3250 m6

Отзывы:

Похожие инструкции для x3250 m6

Бренды по названию

Популярные бренды