Lenovo x3250 m6, Инструкция по установке и обслуживанию

Страница: 53 / 696

Accessing RAID configuration utility
Through the Setup Utility, you can access utilities to configure RAID arrays.
The specific procedure for configuring arrays depends on the RAID card that you are using. For details, see
the documentation for your RAID card. To access the utility for your RAID card, do the following:
Step 1. Turn on the server.
Note: Approximately 20 seconds after the server is connected to power, the power-control button
becomes active.
Step 2. When prompted,
<F1 Setup>
is displayed, press F1. If you have set an administrator password, you
must type the administrator password to access the full Setup Utility menu. If you do not type the
administrator password, a limited Setup Utility menu is available.
Step 3. Select System Settings ➙ Storage .
Step 4. Select the device driver for your RAID card and press Enter. Then, follow the instructions in the
documentation for your RAID card.
Lenovo ToolsCenter Suite CLI program
The Lenovo ToolsCenter Suite CLI program is a collection of server management tools and the program also
covers the configuration function, which is an alternative to the Setup Utility for modifying UEFI settings.
Lenovo ToolsCenter Suite CLI has the following features:
• Utilizing a command-line interface to manage firmware, hardware, and operating systems
• Modifying UEFI settings from the command line without restarting the system to access the Setup Utility
• Configuring the optional remote presence features or other IMM2 settings
• Providing IMM2 LAN over USB interface configuration and issuing setup commands through the
command-line interface
• Scripting environments through a batch-processing mode
• Saving any of the settings as a file and running the file as a script
For more information and to download Lenovo ToolsCenter Suite CLI, go to
https://support.lenovo.com/us/en/documents/LNVO-CENTER.
Using Lenovo XClarity Administrator
The initial setup of Lenovo XClarity Administrator includes the following:
• Preparing the network
• Installing and configuring the Lenovo XClarity Administrator virtual appliance
• Managing systems
• Setting up automatic problem notification optionally
To manage systems based on the network topology that is implemented in your environment, there are a
number of different ways to connect manageable systems to the network and to set up the Lenovo XClarity
Administrator. If you plan to use Lenovo XClarity Administrator to manage the server, you must check for the
latest applicable Lenovo XClarity Administrator updates. For installing the Lenovo XClarity Administrator in
VMware ESXi-based and Hyper-V environments and downloading Lenovo XClarity Administrator updates, go
to:
https://support.lenovo.com/us/en/documents/LNVO-XCLARIT
Chapter 4
.
Configuration information
39