Lenovo x3250 m6, Инструкция по установке и обслуживанию

Страница: 120 / 696

Step 5. Install the hard disk drive into the drive bay.
• For the 2.5-inch drive, slide the release latch 1 to the left. Then, gently push the drive into the
bay until the drive stops.
00
0
0
Figure 34. 2.5-inch simple-swap hard disk drive installation
• For the 3.5-inch drive, slide the release latch 2 to the right and gently push the drive into the bay
until the drive stops. Then, install a new drive and then reinstall the filler or install the filler directly.
000
000
000
000
000
000
000
000
000
000
000
000
0
0
00000000
00000000
00000000
00000000
00000000
00000000
Figure 35. 3.5-inch simple-swap hard disk drive installation
Step 6. Complete the parts replacement. See “Completing the parts replacement” on page 172.
Step 7. Reinstall the security bezel. See “Installing the security bezel” on page 92.
Removing the optical drive
To remove the optical drive, do the following:
Step 1. Turn off the server. Then, disconnect all external cables and remove all peripheral devices.
Step 2. Remove the security bezel. See “Removing the security bezel” on page 91.
Step 3. Remove the server cover. See “Removing the server cover” on page 88.
106
Lenovo System x3250 M6 Installation and Service Guide