manualshive.com logo in svg

Lenovo x3250 m6, Инструкция по установке и обслуживанию

"Lenovo x3250 m6" – надежный сервер для вашего бизнеса. Установочное и сервисное руководство доступно для загрузки бесплатно на manualshive.com. Этот практичный manual поможет вам правильно настроить и обслуживать ваш сервер, обеспечивая безопасность и эффективность работы вашего бизнеса.

Поделиться
Скачать
background image

Fixes or workarounds for many problems might be available in updated UEFI firmware,
device firmware, or device drivers. To display a list of available updates for the server, go to
http://www.ibm.com/support/fixcentral.

Attention:

Installing the wrong firmware or device-driver update might cause the server to

malfunction. Before you install a firmware or device-driver update, read any readme and change
history files that are provided with the downloaded update. These files contain important
information about the update and the procedure for installing the update, including any special
procedure for updating from an early firmware or device-driver version to the latest version.

Important:

Some cluster solutions require specific code levels or coordinated code updates. If

the device is part of a cluster solution, verify that the latest level of code is supported for the
cluster solution before you update the code.

a.

Install UpdateXpress system updates.

You can install code updates that are packaged as an UpdateXpress System Pack or
UpdateXpress CD image. An UpdateXpress System Pack contains an integration-tested
bundle of online firmware and device-driver updates for your server. In addition, you can use
Lenovo ToolsCenter Bootable Media Creator to create bootable media that is suitable for
applying firmware updates and running preboot diagnostics. For more information about
UpdateXpress System Packs, go to:
http://www.ibm.com/support/entry/portal/docdisplay?lndocid=SERV-XPRESS For more
information about the Bootable Media Creator program, go to:
https://support.lenovo.com/us/en/documents/LNVO-BOMC

Be sure to separately install any listed critical updates that have a release date later than the
release date of the UpdateXpress System Pack or UpdateXpress image. Refer to the following
two steps for installing manual system updates.

b.

Install manual system updates.

1.

Determine the existing code levels.

In DSA, click

Firmware/VPD

to view system firmware levels, or click

Software

to view

operating-system levels.

2.

Download and install updates for any code that is not at the latest level.

To display a list of available updates for the server, go to
http://www.ibm.com/support/fixcentral.

When you click an update, an information page is displayed, including a list of the
problems that the update fixes. Review this list for your specific problem; however, even if
your problem is not listed, installing the update might solve the problem.

Step 5.

Check for and correct an incorrect configuration.

If the server is incorrectly configured, a system function can fail to work when you enable it; if you
make an incorrect change to the server configuration, a system function that has been enabled
can stop working.

a.

Make sure that all installed hardware and software are supported.

To verify that the server supports the installed operating system, optional devices, and
software levels, go to http://www.lenovo.com/ serverproven/. If any hardware or software
component is not supported, remove the hardware or uninstall the software to determine
whether it is causing the problem. You must remove nonsupported hardware before you
contact IBM or an approved warranty service provider for support.

b.

Make sure that the server, operating system, and software are installed and configured
correctly.

48

Lenovo System x3250 M6 Installation and Service Guide

Содержание x3250 m6

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для x3250 m6

IBM RS/6000 7043 43P Series User Manual preview
RS/6000 7043 43P Series
Бренд: IBM Страницы: 322
IBM System x3400 M3 Types 7378 Product Manual preview
System x3400 M3 Types 7378
Бренд: IBM Страницы: 45
Omneon MediaDeck Installation Manual preview
MediaDeck
Бренд: Omneon Страницы: 2
HPE SimpliVity 2600 Gen10 Installation And Maintenance Manual preview
SimpliVity 2600 Gen10
Бренд: HPE Страницы: 37
H3C UniServer T1100 G3 User Manual preview
UniServer T1100 G3
Бренд: H3C Страницы: 138
Supermicro SSG-927R-E2CJB User Manual preview
SSG-927R-E2CJB
Бренд: Supermicro Страницы: 62
Olive Olive 4 HD Quick Start Manual preview
Olive 4 HD
Бренд: Olive Страницы: 19
FS 139690 Quick Start Manual preview
139690
Бренд: FS Страницы: 91
IBM TotalStorageFAStT900 User Manual preview
TotalStorageFAStT900
Бренд: IBM Страницы: 112
Dell Force10 MXL Blade Specifications preview
Force10 MXL Blade
Бренд: Dell Страницы: 2
Asus NAS-M25 User Manual preview
NAS-M25
Бренд: Asus Страницы: 82
Asus AR1000 Hardware Reference Manual preview
AR1000
Бренд: Asus Страницы: 32
Asus AP3000 Hardware Reference Manual preview
AP3000
Бренд: Asus Страницы: 42
Asus RS100-E5 - 0 MB RAM User Manual preview
RS100-E5 - 0 MB RAM
Бренд: Asus Страницы: 148
Asus PIKE II 3008 Series User Manual preview
PIKE II 3008 Series
Бренд: Asus Страницы: 80
Asus AP2300 Hardware Reference Manual preview
AP2300
Бренд: Asus Страницы: 44
Asus DS300j User Manual preview
DS300j
Бренд: Asus Страницы: 56
Asus AP2400R Reference Manual preview
AP2400R
Бренд: Asus Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды