Lenovo ThinkStation D30, Руководство пользователя

Страница: 74 / 152

What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 66.
Installing or replacing a hard disk drive enablement module
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
This section provides instructions on how to install or replace a hard disk drive enablement module.
To install or replace a hard disk drive enablement module, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 38.
3. Lift to open the PCI card retainer. See Figure 12 “Opening the PCI card retainer” on page 40.
4. Remove the hard disk drive fan assembly. See “Replacing the hard disk drive fan assembly” on page 55.
5. Locate the hard disk drive enablement module. See “Locating parts on the system board” on page 11.
6. If you are replacing the hard disk drive enablement module, press the plastic tabs together and then lift
the hard disk drive enablement module upward to remove it from the system board.
Figure 39. Removing the hard disk drive enablement module
62
ThinkStation D30 User Guide