Lenovo ThinkStation D30, Руководство пользователя

Страница: 54 / 152

b. If the card is held in place by a retaining latch, press the card retaining latch 1 as shown to
disengage the latch. Grasp the card and gently pull it out of the card slot.
5. Remove the new PCI card from its static-protective package.
6. Install the new card into the appropriate card slot on the system board. See “Locating parts on the
system board” on page 11.
7. Pivot the PCI card latch to the closed position to secure the PCI card.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 66.
Installing or replacing an mSATA solid-state drive
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
This section provides instructions on how to install or replace an mSATA solid-state drive.
To install or replace an mSATA solid-state drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
42
ThinkStation D30 User Guide