Lenovo ThinkStation D30, Руководство пользователя

Страница: 62 / 152

8. Connect the signal cable and the power cable to the new optical drive.
Figure 24. Connecting the optical drive
9. Reinstall the front bezel. See “Removing and reinstalling the front bezel” on page 39.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 66.
Replacing the card reader
Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
on page v.
This section provides instructions on how to install or replace the card reader.
To replace the card reader, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See “Removing the computer cover” on page 38.
3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 39.
4. Locate the card reader. See “Locating components” on page 10.
5. Disconnect the card reader cable from the system board. See “Locating parts on the system board”
on page 11.
50
ThinkStation D30 User Guide