Lenovo ThinkServer RD210, Руководство по техническому обслуживанию аппаратной части

Страница: 60 / 182

Table 3. DSA Preboot messages (continued)
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 9 “Parts listing, ThinkServer RD210 Type 3795, 3796, 3818, and 3819” on page 143 to determine
which components are customer replaceable units (CRU) and which components are field replaceable
units (FRU).
• If an action step is preceded by “(Trained service technician only),” that step must be performed only by
a Trained service technician.
• Go to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information,
hints, tips, and new device drivers or to submit a request for information.
Message
number
Component Test State Description Action
202-802-xxx Memory Memory
Stress Test Failed General
error:
memory
size is
insufficient
to run the
test. 1. Make sure that all memory is enabled by
checking the Available System Memory in
the Resource Utilization section of the DSA
event log. If necessary, enable all memory in
the Setup utility (see the
Installation and User
Guide ).
2. Make sure that the DSA code is at the latest
level. For the latest level of DSA code, go to:
http://www.lenovo.com/support
3. Run the test again.
4. Run the standard memory test to validate all
memory.
5. If the failure remains, go to
http://www.lenovo.com/support for
more troubleshooting information.
202-901-xxx Memory Memory
Stress Test Failed Test failure. 1. Run the standard memory test to validate all
memory.
2. Make sure that the DSA code is at the latest
level. For the latest level of DSA code, go to:
http://www.lenovo.com/support
3. Turn off the system and disconnect it from
power.
4. Reseat the DIMMs.
5. Reconnect the system to power and turn on
the system.
6. Run the test again.
7. If the failure remains, go to
http://www.lenovo.com/support for
more troubleshooting information.
52
ThinkServer RD210 Hardware Maintenance Manual