Lenovo ThinkServer RD210, Руководство по техническому обслуживанию аппаратной части

Страница: 139 / 182

1. If you removed any air baffles, reinstall them now (see “Removing and installing the DIMM air baffle”
on page 77).
2. If you removed the cover, replace it (see “Removing and replacing the cover” on page 72).
3. Install the server in the rack cabinet (see the Rack Installation Instructions that come with the server
for instructions).
4. Reconnect the cables and power cords.
5. Update the server configuration (see “Updating the server configuration” on page 132).
6. Slide the server back into the rack, if necessary.
Connecting the cables
The following illustration shows the locations of the input and output connectors on the front of the server.
00000000000000
00
00
000
000
000
000
1
Hard disk drive activity LED (green)
11
Rack release latch
2
Hard disk drive status LED (amber)
12
USB 2 connector
3
Drive bay 0
13
Optical drive eject button
4
Drive bay 2
14
Optical drive activity LED
5
Drive bay 4
15
Optical drive bay
6
Power-control button and LED
16
Drive bay 5
7
Operator information panel
17
Drive bay 3
8
Operator information panel release latch
18
Drive bay 1
9
Video connector
19
Rack release latch
10
USB 1 connector
The following illustration shows the LEDs on the rear of the server.
0000000
0000000
0000000
00000000
000 0000
000
00000
000 000 000
000
00000000
1
Slot 1, PCI Express
11
USB 3 connector
2
Ethernet activity LED
12
Serial connector
3
Ethernet link LED
13
System-error LED (amber)
4
Video connector
14
System-locator LED (blue)
5
Slot 2, PCI Express
15
Power-control button LED (green)
Chapter 7
.
Installing optional devices and replacing customer replaceable units
131