Lenovo ThinkServer RD210, Руководство по техническому обслуживанию аппаратной части

Страница: 140 / 182

6
USB 4 connector
16
Ethernet 2 connector
7
AC LED (green)
17
Ethernet 1 connector
8
DC LED (green)
18
Ethernet connectors 3 and 4 (with optional 2-port
Ethernet card)
9
Power supply error LED (amber)
19
System management Ethernet connector
10
Power cord connectors
You must turn off the server before you connect or disconnect cables.
See the documentation that comes with any external devices for additional cabling instructions. It might be
easier for you to route cables before you connect the devices to the server.
Cable identifiers are printed on the cables that come with the server and optional devices. Use these
identifiers to connect the cables to the correct connectors.
1
USB cable release lever
2
USB cable
There are release levers on the Ethernet and systems management connectors. To disconnect a cable from
one of these connectors, pull up on the lever to release the cable.
1
Ethernet activity LED
3
Ethernet speed LED
2
Ethernet port
4
Ethernet cable release lever
Updating the server configuration
When you start the server for the first time after you add or remove an internal option or external device,
you might receive a message that the configuration has changed. The UEFI Setup Utility program starts
automatically so that you can save the new configuration settings.
132
ThinkServer RD210 Hardware Maintenance Manual